No products in the cart.
Bradford™ Polymax Wall Insulation Batts
$ 5.83–$ 17.41 p/m2 inc. GST
Bradford Polymax™ thermal wall insulation is designed to maximise comfort and reduce energy bills. These 100% polyester insulation batts are suitable for the walls and ceilings of residential homes across Australia.
Polymax Polyester Wall Insulation by CSR Bradford
Bradford Polymax thermal insulation is designed to maximise comfort and lower energy bills. Polymax helps to reduce heat transfers through the walls, ceiling and floor or residential and commercial buildings and offices. In an uninsulated home, as much as 42% of your heat can be lost through the ceiling alone in winter, while in summer heat can flow into your home making it uncomfortably hot. All this results in higher energy bills from running your heating and cooling systems longer.
Polymax vs Glasswool Insulation
Polymax is made from 100% polyester and is very different to other Bradford products such as the Gold Batts, Optimo Underfloor and Soundscreen which are made from fibreglass. A key difference between glasswool and polyester is that polyester insulation contains no breathable fibres and is soft and easy to handle. Unlike glasswool which is cut with a knife, polyester insulation is often torn to size. Polyester is the preferred solution for allergy sufferers, although it comes at a much higher cost. Polymax is more expensive to manufacture and bulkier to transport, especially to regional areas in Australia. Check out our delivery information page for the latest prices.
BRADFORD POLYMAX THERMAL WALL INSULATION BATTS
|R-VALUE||THICKNESS||SIZE||PIECES PER PACK||M² PER PACK||BRADFORD PRODUCT CODE|
|R1.5||90mm||430mm x 1160mm||16||8.0||65297|
|R1.5||90mm||580mm x 1160mm||16||10.8||65298|
|R2.0||90mm||430mm x 1160mm||12||6.0||126871|
|R2.0||90mm||580mm x 1160mm||12||8.1||126873|
|R2.5||90mm||430mm x 1160mm||8||4.0||126754|
|R2.5||90mm||580mm x 1160mm||8||5.4||126874|
100% Reusable Polyester Insulation
Bradford Polymax is made from the same material as used in pillow and doonas, is low allergen and produces no VOC emissions. Polymax Insulation is 100% reusable making it a great environmental choice. The polyester fibres are made from up to 80% recycled content from post-consumer (PET) packaging such as empty drink bottles. No chemicals or resin binders are used in the manufacturing process.
Benefits of Polymax
- Light-weight batts
- Can reduce winter heat loss and summer heat gain
- Made from 100% polyester, it’s comfortable and easy to handle
- Made from up to 80% recycled fibre
- No waste is generated in manufacture
- Complies with AS 4859.1
Comfortable to Handle and Install
Bradford Polymax insulation’s carefully engineered fibres are heat bonded without the use of added chemical binders. This results in a product that is soft and easy to handle and requires no special protective clothing or mask to install.
Maximise the Energy Efficiency of Your Home
To improve the energy efficiency of your home we recommend installing insulation in your external walls, internal walls, between levels in a double storey house, under the floor and around the pipes (known as pipe-lagging). The rising cost of energy means that many DIY builders are opting for higher R-values than those specified on their energy report.
The effectiveness of insulation is measured by the R-value not the thickness. The higher the R-value, the better the thermal performance of the insulation. Bradford Polymax Thermal Wall Batts are available in R1.5, R2.0 and R2.5 and are designed to fit within the standard 90mm joists of Australian homes. To maximise the effectiveness of your insulation we recommend a holistic design approach. Passive design techniques such as shading, building orientation and double glazed windows will also help to improve comfort and reduce heat loss and gains.
Product Information Downloads
- Bradford Polymax Insulation Brochure
- Bradford Polyester Insulation Range
- Bradford Polyester Thermal Data Sheet
R1.5, R2.0, R2.5