DIY Insulation Videos, Ceilings & more

how-to-install-insulation-diy-tips-pricewise-insulation-earthwool-pink-batts

DIY insulation installing:

It’s fully possible to install your own insulation, providing you take the necessary preparations. These informative videos provide some useful info on the Knauf Earthwool insulation brand. They will also give some great tips and insights into how to install ceiling insulation and more in your home.

DIY Insulation – How to Install Earthwool Ceiling Insulation

 

DIY Insulation – How to Install Earthwool Wall Insulation

In a new home, wall insulation may contribute to less than 1% of the total building cost of the home, yet will delivered energy savings for the entire life of the home. Check out the below video from Knauf Insulation on the benefits of wall insulation and how to install it. Timber framed homes will typically require either a 580mm or 430mm wide wall insulation, whereas steel-framed buildings will need a 450mm or 600mm wide insulation. It’s not uncommon to come across a building where due to error or just a particular preference by the building owner, the framing is spaced outside of these standards, e.g. at 500mm spacing. In these instances, the installer must weigh up the cost of cutting and throwing away the excess insulation, compared to the extra time and work required to install the many offcuts. In a commercial setting, the cost in time will usually out-weigh the cost in materials, however if you’re a DIY enthusiast and have time to spare, it’s possible to use practically every scrap of insulation to good effect.

DIY Insulation – How to install Earthwool Glasswool Underfloor Insulation

It’s easy to under-estimate the immediate and long term benefits of thermal underfloor batts, when installed correctly between the exposed floor joists underneath the home. Say goodbye to the chilly winter floor boards – heat up the lounge room and you’ll notice the floor also warming up together with the air temperature. There are a number of different options and materials available, but they all essentially work in the same way – by restricting the heat transfer

Save energy with insulation:

Small Retrofit DIY Ceiling Installs – Is it a one-man job?

While it’s fully possible for one person to install insulation, before you take the plunge and go it alone, there are a couple of important factors to consider. Check the size of the manhole and compare with the insulation bag (unopened). If there is barely room to push the unopened bag through and into the ceiling, then you have three possible options:

  1. Get someone to help you. This is by far the best option, and will make the whole job a lot easier.
  2. Split open the bag, and load the pieces manually up into the ceiling – this is very time consuming, and not recommended.
  3. Load the insulation bags through the roof. This will only work where the roof is tiled, and it comes with its own challenges, not least you will need to secure yourself against the risk of falls. This method also depends on fine weather.

Installing insulation in existing roof spaces is tough work, and wherever possible we would recommend you to tackle it together with another person.

 

Call Pricewise on 1300 729 639 for free advice regarding the best solutions for your project!

pricewise-insulation-cheap-insulation-batts-online-diy insulation-banner-4

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Average rating:  
 0 reviews