Phone 07 3667 8042


Pricewise Insulation Brisbane

If you are a owner builder, DIY renovator or even a commercial developer searching for insulation batts Brisbane, you can order online today from Pricewise Insulation and expect delivery within 1 – 2 business days. Gone are the days when thermal and acoustic insulation were considered optional extras and the insulation itself an avoidable cost. Energy efficiency is now at the heart of all modern building design, and new buildings are required to meet a minimum standard of energy efficiency.

Delivery Information

Reduce Energy Usuage

The cheapest and easiest method of increasing a buildings R-value to the required or desired level is by installing thermal insulation in the walls, ceilings and even underfloor area of the building. This low cost investment will drastically reduce the energy usage requirements for the life of the home. In hot and humid climates, bulk insulation such as Pink Batts Ceiling insulation is often installed in combination with a reflective foil sarking, which does a great job in reflecting the radiant heat, and adds to the total performance R-Value of the home.

Shop Online




  • Bradford Gold Batts Wall Insulation

    $ 3.51$ 4.45 p/m2 inc. GST
  • Greenstuf® Polyester Ceiling Insulation

    $ 5.58$ 22.68 p/m2 inc. GST
  • Tape for Foil Wrap

    $ 10.00 inc. GST
  • Insulation Knife

    $ 13.00 inc. GST
  • Masks

    $ 24.00 inc. GST
  • Knauf Earthwool® Roof Batts

    $ 4.45$ 12.02 p/m2 inc. GST
  • Knauf Earthwool® Wall Insulation Batts

    $ 3.01$ 11.44 p/m2 inc. GST




Product R-Value vs Performance R-Value

All insulation has an R-value or R-rating – a number which defines how effective the material is at restricting the transfer of heat. The R-Value of a typical ceiling or wall insulation batt usually proportionate to it’s thickness – the thicker it is, the more effective it will be in reducing heat transfer. Bulk insulation (glasswool, polyester, etc) will almost always be quoted on its product R-Value, which only takes into account the material itself. System R-value, or the performance R-Value, takes into account the effectiveness of the insulation in combination with other external factors- typically the surrounding building materials, and importantly – any recommended air-gap which is required. Reflective foil insulation has practically no R-Value unless it is installed with an air-gap.

Keep insulation High and Dry Prior to Installing

Pricewise Insulation Brisbane delivery – and that includes Gold Coast! Roof insulation, underfloor rolls, wall batts and more. If you need to insulation batts delivered to the Gold Coast, give us a call on 1300 729 639. If you’re not able to be home to receive the delivery, make sure you advice our staff of this at time of ordering, or mention this when placing your order online. It’s usually not a problem for our couriers to drop the insulation off even if you’re not home, but insulation should never be allowed to stand out in the rain.



How Does Insulation Work?

The key to glasswool insulation’s effectiveness lies in the millions of tiny air-pockets concealed within the insulation batt. If the material becomes soaked, it’s practically useless, extremely difficult to dry out and can breed mould and lead to other possible issues. To avoid this occurrence, store them safely inside the garage or underneath a covered car port, and if possible place them on a pallet or other object. This will ensure that when the time comes to install the insulation it is clean, easy to cut and will do the job its intended to do for the life of your house. If only part of the insulation becomes briefly wet, simply use a sharp knife to cut off and dispose of the any portion which may have become wet. Never install wet or damp insulation.



Autex GreenStuf Insulation Logo


Fields marked with a * are required.